Sales - Service - Parts - Rebuilds/Repairs
System Design - Preventive Maintenance Contracts

FILTER ELEMENTS

OIL SEPARATORS - Deep Filters

Another common method of obtaining increased air flow capacity from a given size air-oil separator is to manufacture the element in so called “deep filter” construction. This form of separator uses as many as three different grades of borosilicate glass, wrapped onto the support tube in larger than normal amounts. The finished product then achieves increased airflow capacity very similar to that of the pleated air oil separator, while at the same time maintaining low initial pressure drop and residual oil content. Field testing of this element has demonstrated an improvement in oil separation especially in high “challenge rate” applications, in which more oil aerosol is contained in the compressed air than is normal.

Deep Filters

    A B C D
Part No.
Capacity
cfm m3/m
Flange OD
inches / mm
Flange ID
inches / mm
Length
inches / mm
Body OD
inches / mm
KV61-011
125 3.54
8.66 / 220 2.95 / 75 6.30 / 160 5.31 / 135
KV66-012
160 4.53
6.69 / 170 2.95 / 75 7.87 / 200 5.31 / 135
KV100-027
230 6.51
7.87 / 200 4.29 / 109 9.06 / 230 6.69 / 170
KV150-034
320 9.06
7.87 / 200 4.29 / 109 12.00 / 305 6.69 / 170
KV265-018
565 16.00
13.98 / 355 8.66 / 220 12.00 / 305 11.81 / 300
KV335-006
705 19.97
12.91 / 328 8.23 / 209 15.75 / 400 10.83 / 275
KV350-022
775 21.95
13.98 / 355 8.66 / 220 15.75 / 400 11.81 / 300
KV440-013
990 28.04
13.98 / 355 8.66 / 220 19.69 / 500 11.81 / 300
KV535-003
1200 33.98
13.98 / 355 8.66 / 220 23.62 / 600 11.81 / 300
KV625-012
1425 40.36
13.98 / 355 8.66 / 220 27.56 / 700 11.81 / 300


Click on logos to view
| Home | Sales | Services | Why Oil Free? | Employment | Contact |
7540 Suzi Lane, Westminster, CA 92683 - Phone: (714) 908-5250 - Fax: (714) 908-5251