Sales - Service - Parts - Rebuilds/Repairs
System Design - Preventive Maintenance Contracts

FILTER ELEMENTS

OIL FILTERS


In the compressor system, the oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installa-tion of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter.

Filtering in 5-25 micron range (depending upon application), it is again, the deposit-ing of oil-borne contaminant over time (similar to the oil-separator), that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil.

Oil Filters

Like all of our products, Keltec oil filters are built of the highest quality materials and workmanship. Specific filtration levels are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical.

    A B C
Part No.
Capacity
(gallons/liters/min.)
Thread
OD
inches / mm
Length
inches / mm
KL310-017 2.17 / 12.00 3/4 - 16 3.15 / 80.00 3.66 / 93.00
KL470-008 5.00 / 20.00 3/4 - 16 3.15 / 80.00 5.50 / 140.00
KL510-016 10.50 / 40.00 1 - 12 3.78 / 96.00 6.77 / 172.00
KL320-004 10.50 / 40.00 3/4 - 16 3.78 / 96.00 5.50 / 140.00
KL460-009 10.50 / 40.00 1 - 12 3.78 / 96.00 5.50 / 140.00
KL135-035 11.89 / 45.00 1 - 12 3.78 / 96.00 6.77 / 172.00
KL440-015 18.50 / 70.00 1 - 12 3.78 / 96.00 8.30 / 210.00
KL590-007 18.50 / 70.00 1 - 12 4.33 / 110.00 8.94 / 227.00
KL800-020 47.50 / 180.00 1 -1/2 -16 5.50 / 140.00 11.69 / 302.00


Click on logos to view
| Home | Sales | Services | Why Oil Free? | Employment | Contact |
7540 Suzi Lane, Westminster, CA 92683 - Phone: (714) 908-5250 - Fax: (714) 908-5251