This method of oil separation consists of a deep bed type oil separator element, placed inside of a pressure resistant body, or “can” similar to that of traditional oil filters. Extremely easy to replace in comparison to standard oil-separators which are enclosed in a pressurized tank, this element design is somewhat limited in application due to restrictions of air flow capacity.
|
|
| |
|
A |
B |
C |
Part No.
|
Flow Rate
cfm |
Thread
m3 / m |
Body Diameter
inches / mm |
Length
inches / mm |
| KD490-006 |
35.00 / 1.00 |
m22 x 1.5 |
2.99 / 76 |
5.00 / 127 |
| KD610-008 |
70.00 / 2.00 |
m24 x 1.5 |
3.66 / 93 |
8.35 / 212 |
| KD710-009 |
106.00 / 3.00 |
m39 x 1.5 |
5.35 / 136 |
6.97 / 177 |
| KD690-006 |
141.00 / 4.40 |
m32 x 1.5 |
4.25 / 108 |
10.24 / 260 |
| KD900-018 |
194.00 / 5.50 |
m39 x 1.5 |
5.35 / 136 |
11.89 / 302 |
|
